APEX ATLAS Expert+ cutting plotter

APEX ATLAS cutting plotter

Top model for composites: rack-and-pinion drive, milling and protection against conductive dust, ±0.1 mm.

Prepregs and honeycomb cores

To select a configuration, send us the material, thickness, sheet size or roll width and the operations you need: cutting, kiss-cutting, creasing, milling, marking. Delivery across Russia.

How a flatbed cutting plotter works

The plotter cuts sheet material along contours taken from CAD. Besides knife cutting it can mill, crease, kiss-cut, mark and punch holes – all within a single job.

  1. Contours are prepared in CAD and nested on the sheet.
  2. The material is placed on the table and held down by vacuum.
  3. The tool follows the programmed path.
  4. Finished parts are removed from the table.

APEX (АПЕКС) ATLAS Expert+ is the top model of the series for composites: geared drive, milling and protection of components against conductive dust. Prepregs are cut and honeycomb cores for sandwich panels are machined on the same table. Positioning accuracy is ±0.1 mm.

Applications

Aircraft and helicopter manufacturing, space industry, shipbuilding – wherever honeycomb-core panels are made and prepregs are laid up. For contour-guided ply layup, the MAYAK laser projector is used.

Versions and specifications

APEX ATLAS Expert+ · part number on request

ParameterValue
DriveRack-and-pinion (geared)
Protection against conductive dustYes
MillingYes
Positioning accuracy±0.1 mm
Repeatability0.1 mm (material-dependent)
Working area600 × 600 mm to 3200 × 3200 mm; custom sizes available
Noise levelup to 80 dB
Operating temperature+10 … +35 °C
Relative humidity20–80 %
Material hold-downVacuum
Duty24/7
Toolsuniversal cutting tool, pneumatic and electric oscillating tools, creasing tool, angled cutting tool, driven rotary (disc) tool, kiss-cut tool
Modulesuniversal, punching, milling, marking – depending on model design

What you get with a YUSTAS quotation

  • Kit selection and price on the same business day.
  • Configuration and accessories matched to your tolerance.
  • The quotation covers configuration, lead time, warranty, training and commissioning.
  • A demonstration of the equipment on your part, or at our premises.

Request a quote or a demo: send the model, configuration, quantity and required delivery date to info@ooo-justas.ru or call +7 (499) 141-82-71 (Mon–Fri, 9:00–17:00). We respond within one business day.

See also: ATLAS+ · ATLAS Expert · All APEX equipment

Frequently asked questions

What makes ATLAS Expert+ the top model?

It combines the geared drive and milling of ATLAS Expert with the conductive-dust protection of ATLAS+, so prepregs can be cut and honeycomb cores milled on one table.

What materials can an ATLAS plotter cut?

Non-metallic sheet and roll materials: rubber, compressed fibre gasket sheet (paronite), foam, cardboard and corrugated board, films, canvas, dry fabrics, prepregs and honeycomb cores. The tool is selected for the material and thickness.

What is the difference between belt and rack-and-pinion drive?

A belt drive is quieter and sufficient for knife cutting. A rack-and-pinion (geared) drive is stiffer and is required for milling dense materials.

Why is protection against conductive dust needed?

Cutting carbon fabric and CFRP produces electrically conductive dust. Without protection it enters the electronics and causes short circuits. For composites, choose the "+" models.

What table size should I choose?

Size the table to your largest sheet or roll width plus a margin. The ATLAS range runs from 600 × 600 mm to 3200 × 3200 mm; non-standard sizes are also built.

Request a quote or a demonstration

Tell us what you need to measure, the tolerance, the size of the object and your timeline. Attach drawings if you have them. We reply within one business day.

Email info@ooo-justas.ruCall +7 (499) 141-82-71

Mon–Fri, 9:00–17:00 Moscow time (UTC+3).