APEX ALTAIR laser tracker

APEX ALTAIR laser tracker in the YUSTAS lab

Laser coordinate measuring system with a built-in interferometer: ±(10 µm + 5 µm/m), 30–80 m, 300 and 600 series, Russian State Register of Measuring Instruments (Rosstandart), entry 98811-26.

ALTAIR is a laser coordinate measuring system made by APEX LLC (ООО «АПЕКС»), Moscow, with a built-in interferometer and weather station. Volumetric accuracy with an SMR is ±(10 µm + 5 µm/m); with a probe or 6D sensor it is ±(30 µm + 5 µm/m). Range is 30, 60 or 80 m, at up to 1,000 points per second.

  • ALTAIR 300 (330, 360, 380) – SMR measurements.
  • ALTAIR 600 (630, 660, 680) – BK-2 probe and 6D sensor for hidden points and orientation.

How a laser tracker works

The tracker points its laser beam at a spherically mounted retroreflector (SMR) and follows it even while the reflector is moving. Up to 1,000 times per second it measures three quantities – distance D, horizontal angle Hz and vertical angle V – and computes X, Y, Z coordinates from them in real time.

The software compares the measured points with the drawing or CAD model and reports deviations. This is how the geometry of large parts is inspected, equipment is aligned to its design position, machine tools and robots are calibrated, and assemblies are built "virtually" on the shop floor.

Applications

The APEX ALTAIR laser tracker measures point coordinates on large objects. It is set up next to the part or equipment during assembly, jig and fixture alignment, inspection of the relative position of assemblies, and CAD comparison.

  • Assembly: position components in a common coordinate system.
  • Inspection: check flatness, coaxiality and support positions from measured points.
  • Adjustment: watch an element's position change in real time while adjusting it.
  • Acceptance: compare as-built geometry with the drawing and document the results.

300 or 600 series: which to choose

Both series measure with an SMR. The 600 series also supports additional devices for hidden points and orientation. First define how each point will be accessed, then the distance from the instrument to the target.

VersionMeasurement radius with SMRAdditional devices
ALTAIR 3300.1–30 mNone
ALTAIR 3600.1–60 mNone
ALTAIR 3800.1–80 mNone
ALTAIR 6300.1–30 mBK-1, BK-2, 6D
ALTAIR 6600.1–60 mBK-1, BK-2, 6D
ALTAIR 6800.1–80 mBK-1, BK-2, 6D

Measurement radius is the distance from the tracker to the reflector; it must not be confused with the diameter of the measurement volume. The instrument's range is also not the range of every probe.

ALTAIR accessories

  • Reflectors and nests. Used for coordinate measurement and repeatable placement on control points; selected by size, mounting method and surface access.
  • BK-1 and BK-2. Contact probes for points where an SMR cannot be placed conveniently. BK-1 range: 0.1–30 m; BK-2 range: 2.7–15 m. The tracker must see the tracked part of the device.
  • 6D sensor. Determines both position and orientation of an object – three coordinates and three angles (6DoF), e.g. when checking the motion of an assembly.
  • Stand, power supply, cables and software. Chosen together with the instrument based on the installation site, duration of work and required output format.

Measurements for production tasks

ALTAIR can be considered for inspection of castings, assembly tooling and the position of assemblies. For each application, permissible deviations, point access and the required output are defined. YUSTAS helps translate these requirements into an instrument configuration.

Price and configuration

The price depends on the version, reflectors, probes, stand, software and support package. For a quotation, send a drawing or description of the part, distances to control points, tolerances and the required delivery date. We will discuss the kit, a demonstration on your task, training and commissioning; the terms of each stage are fixed in the quotation.

Documents and verification

ALTAIR systems are registered under entry 98811-26. Manufacturer: APEX LLC, Moscow. The verification interval is one year. During selection we check the version and documentation set against the specific instrument.

Laser tracker vs. laser scanner

A tracker determines the coordinates of a tracked target; a scanner captures many points on a surface. Inspection of individual features, alignment and assembly call for one set of equipment; dense surface digitisation calls for another. Having "laser" in the name does not make these systems interchangeable.

Comparing ALTAIR with API and Leica Absolute Tracker

Compare the range to target, volumetric accuracy under identical conditions, probe support, available software and scope of supply. Then test the shortlisted system on a typical part with your tolerance.

What you get with a YUSTAS quotation

  • Kit selection and price on the same business day.
  • Version and accessories matched to your tolerance.
  • The quotation covers configuration, lead time, warranty, training and commissioning.
  • A demonstration of the instrument on your part or site, or at our premises.

Request a quote or a demo: send the model, configuration, quantity and required delivery date to info@ooo-justas.ru or call +7 (499) 141-82-71 (Mon–Fri, 9:00–17:00). We respond within one business day.

Don't need your own instrument? YUSTAS performs laser tracker measurements as a service, with instrument and operator. All models: laser trackers.

ALTAIR in the YUSTAS lab

APEX ALTAIR optics and tracking module, close-up
Carrying case with contact probe and accessories for the APEX ALTAIR laser tracker

Frequently asked questions

How does a laser tracker differ from a total station?

A total station delivers millimetres; a tracker delivers tens of micrometres. A tracker continuously follows the reflector and records up to 1,000 points per second, so it suits machine tools, tooling and large parts rather than land surveying.

What accuracy will I get at my distance?

Use the formula from the datasheet. For ±(10 µm + 5 µm/m): ±35 µm at 5 m, ±60 µm at 10 m, ±110 µm at 20 m. These values apply at stable temperature and without vibration.

What are an interferometer and ADM?

An ADM (absolute distance meter) measures the distance to the reflector directly. An interferometer (IFM) measures the change in distance and is more accurate in dynamic measurements. All ALTAIR trackers have an interferometer.

Does the tracker need verification?

If measurements fall within the scope of state metrological regulation, yes. ALTAIR is listed in the Russian State Register of Measuring Instruments (Rosstandart), entry 98811-26, with a one-year verification interval.

How do I find out the price and lead time?

Send the model, quantity, required configuration and date. The quotation states price, scope, payment and delivery terms. Stock and lead time should not be judged from the catalogue card alone.

How are training and support arranged?

Tell us whether you need initial setup, operator training or help with an existing kit. Scope and provider are agreed before purchase; warranty, repair and support terms are fixed in the quotation and contract.

Request a quote or a demonstration

Tell us what you need to measure, the tolerance, the size of the object and your timeline. Attach drawings if you have them. We reply within one business day.

Email info@ooo-justas.ruCall +7 (499) 141-82-71

Mon–Fri, 9:00–17:00 Moscow time (UTC+3).