Rack-and-pinion drive and milling module: cutting and milling of dense sheet materials on one table, ±0.1 mm.
Cutting and milling dense materials
To select a configuration, send us the material, thickness, sheet size or roll width and the operations you need: cutting, kiss-cutting, creasing, milling, marking. Delivery across Russia.
How a flatbed cutting plotter works
The plotter cuts sheet material along contours taken from CAD. Besides knife cutting it can mill, crease, kiss-cut, mark and punch holes – all within a single job.
- Contours are prepared in CAD and nested on the sheet.
- The material is placed on the table and held down by vacuum.
- The tool follows the programmed path.
- Finished parts are removed from the table.
APEX (АПЕКС) ATLAS Expert is the choice when a knife is not enough. The rack-and-pinion drive carries the load of the milling spindle, so dense sheet materials can be both cut and milled on one table. Positioning accuracy is ±0.1 mm, repeatability 0.1 mm.
Modules
Modules are fitted to suit the task: milling, marking, punching, and a universal module for mounting different tools. Several tools can work within one job.
When to choose another model
For composites with carbon dust the electronics need protection – that is ATLAS Expert+. For soft materials without milling, the base ATLAS is sufficient.
Versions and specifications
APEX ATLAS Expert · part number on request
| Parameter | Value |
|---|---|
| Drive | Rack-and-pinion (geared) |
| Protection against conductive dust | No |
| Milling | Yes |
| Positioning accuracy | ±0.1 mm |
| Repeatability | 0.1 mm (material-dependent) |
| Working area | 600 × 600 mm to 3200 × 3200 mm; custom sizes available |
| Noise level | up to 80 dB |
| Operating temperature | +10 … +35 °C |
| Relative humidity | 20–80 % |
| Material hold-down | Vacuum |
| Duty | 24/7 |
| Tools | universal cutting tool, pneumatic and electric oscillating tools, creasing tool, angled cutting tool, driven rotary (disc) tool, kiss-cut tool |
| Modules | universal, punching, milling, marking – depending on model design |
What you get with a YUSTAS quotation
- Kit selection and price on the same business day.
- Configuration and accessories matched to your tolerance.
- The quotation covers configuration, lead time, warranty, training and commissioning.
- A demonstration of the equipment on your part, or at our premises.
Request a quote or a demo: send the model, configuration, quantity and required delivery date to info@ooo-justas.ru or call +7 (499) 141-82-71 (Mon–Fri, 9:00–17:00). We respond within one business day.
See also: MAYAK laser projector for ply layup · All APEX equipment
Frequently asked questions
When do I need ATLAS Expert instead of ATLAS?
When you need to mill dense sheet materials as well as cut them. The geared drive of ATLAS Expert carries the milling load; the belt-drive ATLAS is intended for knife cutting.
What materials can an ATLAS plotter cut?
Non-metallic sheet and roll materials: rubber, compressed fibre gasket sheet (paronite), foam, cardboard and corrugated board, films, canvas, dry fabrics, prepregs and honeycomb cores. The tool is selected for the material and thickness.
What is the difference between belt and rack-and-pinion drive?
A belt drive is quieter and sufficient for knife cutting. A rack-and-pinion (geared) drive is stiffer and is required for milling dense materials.
Why is protection against conductive dust needed?
Cutting carbon fabric and CFRP produces electrically conductive dust. Without protection it enters the electronics and causes short circuits. For composites, choose the "+" models.
What table size should I choose?
Size the table to your largest sheet or roll width plus a margin. The ATLAS range runs from 600 × 600 mm to 3200 × 3200 mm; non-standard sizes are also built.
Request a quote or a demonstration
Tell us what you need to measure, the tolerance, the size of the object and your timeline. Attach drawings if you have them. We reply within one business day.
Email info@ooo-justas.ruCall +7 (499) 141-82-71Mon–Fri, 9:00–17:00 Moscow time (UTC+3).
