Plotter for composite production: belt drive and protection against conductive dust. Prepregs, dry fabrics, ±0.1 mm.
Cutting prepregs and dry fabrics
To select a configuration, send us the material, thickness, sheet size or roll width and the operations you need: cutting, kiss-cutting, creasing, milling, marking. Delivery across Russia.
How a flatbed cutting plotter works
The plotter cuts sheet material along contours taken from CAD. Besides knife cutting it can mill, crease, kiss-cut, mark and punch holes – all within a single job.
- Contours are prepared in CAD and nested on the sheet.
- The material is placed on the table and held down by vacuum.
- The tool follows the programmed path.
- Finished parts are removed from the table.
APEX (АПЕКС) ATLAS+ is designed for composite production. It differs from the base model by protecting its components against the electrically conductive dust produced by carbon fabric. The belt drive keeps the plotter quiet. Positioning accuracy is ±0.1 mm, repeatability 0.1 mm.
What it cuts
Dry carbon and glass fabrics, prepregs, films and release layers for aircraft, helicopter and shipbuilding. Cut plies are conveniently laid up under the MAYAK laser projector, which shows the position of each ply on the tool.
When to choose another model
If honeycomb cores must be milled as well as fabric cut, choose ATLAS Expert+.
Versions and specifications
APEX ATLAS+ · part number on request
| Parameter | Value |
|---|---|
| Drive | Belt |
| Protection against conductive dust | Yes |
| Positioning accuracy | ±0.1 mm |
| Repeatability | 0.1 mm (material-dependent) |
| Working area | 600 × 600 mm to 3200 × 3200 mm; custom sizes available |
| Noise level | up to 80 dB |
| Operating temperature | +10 … +35 °C |
| Relative humidity | 20–80 % |
| Material hold-down | Vacuum |
| Duty | 24/7 |
| Tools | universal cutting tool, pneumatic and electric oscillating tools, creasing tool, angled cutting tool, driven rotary (disc) tool, kiss-cut tool |
| Modules | universal, punching, milling, marking – depending on model design |
What you get with a YUSTAS quotation
- Kit selection and price on the same business day.
- Configuration and accessories matched to your tolerance.
- The quotation covers configuration, lead time, warranty, training and commissioning.
- A demonstration of the equipment on your part, or at our premises.
Request a quote or a demo: send the model, configuration, quantity and required delivery date to info@ooo-justas.ru or call +7 (499) 141-82-71 (Mon–Fri, 9:00–17:00). We respond within one business day.
See also: ATLAS · All APEX equipment
Frequently asked questions
How does ATLAS+ differ from the base ATLAS?
ATLAS+ adds protection of its components against conductive dust from carbon fabric; drive type (belt), accuracy and working area range are the same.
What materials can an ATLAS plotter cut?
Non-metallic sheet and roll materials: rubber, compressed fibre gasket sheet (paronite), foam, cardboard and corrugated board, films, canvas, dry fabrics, prepregs and honeycomb cores. The tool is selected for the material and thickness.
What is the difference between belt and rack-and-pinion drive?
A belt drive is quieter and sufficient for knife cutting. A rack-and-pinion (geared) drive is stiffer and is required for milling dense materials.
Why is protection against conductive dust needed?
Cutting carbon fabric and CFRP produces electrically conductive dust. Without protection it enters the electronics and causes short circuits. For composites, choose the "+" models.
What table size should I choose?
Size the table to your largest sheet or roll width plus a margin. The ATLAS range runs from 600 × 600 mm to 3200 × 3200 mm; non-standard sizes are also built.
Request a quote or a demonstration
Tell us what you need to measure, the tolerance, the size of the object and your timeline. Attach drawings if you have them. We reply within one business day.
Email info@ooo-justas.ruCall +7 (499) 141-82-71Mon–Fri, 9:00–17:00 Moscow time (UTC+3).
