CAD contour projection for composite ply layup, marking and assembly: 1.5–12 m, ±0.25 mm at 4 m, up to 20 projectors per system.
Projecting CAD contours onto the tool and the part
To select a configuration, send the CAD model, working area dimensions and the sequence of operations. Projection accuracy depends on distance, registration and conditions; the value stated for 4 m cannot be applied to the whole 1.5–12 m range. Delivery across Russia.
How a laser projector works
Inside the projector are a laser, a focusing system and two galvanometer-driven mirrors: one steers the beam along the X axis, the other along Y. The mirrors trace the contour so fast that the eye sees a continuous line.
- The contour is taken from the CAD model.
- The projector is registered to the part using reference targets.
- The mirrors trace the contour with the beam.
- The operator sees where to lay the ply or place the part.
The projector draws the CAD contour with a laser directly on the tool or part. The operator sees where to lay a fabric ply, where to drill, where to place a bracket or route a cable. Templates and lofting boards are no longer needed, and the sequence of operations is defined by the software.
APEX (АПЕКС) MAYAK Optimum projects from 1.5 to 12 m. Positioning accuracy is ±0.25 mm at a distance of 4 m; line width is 0.5 mm at 3 m. The laser is green (520–532 nm), the colour in which the eye best distinguishes a line, with a nominal output of no more than 1 mW.
Software
One control station drives up to 20 projectors for large or complex-shaped parts. The software allocates projection zones, builds contours and their sequence from the CAD model, and shows projector positions in 3D. Supported formats: .stp, .igs, .dxf, .CATpat, .ply, .dat, .txt, .csv, .xyz. Access profiles: operator and administrator.
Applications
- Ply-by-ply layup of polymer composite parts.
- Marking for painting, drilling and installation; marking of blanks for manual cutting.
- Assembly of welded structures; routing of cables, pipes and rods.
- Kitting of parts after the machine tool or cutting plotter.
- Marking and positioning of precast concrete elements.
Registration and inspection
Registering the projector to the part and inspecting the tooling can be done with a laser tracker – this is YUSTAS's core work. The projector shows where to place things; the actual geometry after assembly is verified by measurement.
Versions and specifications
MAYAK Optimum · part number on request
| Parameter | Value |
|---|---|
| Projection distance | 1.5–12 m |
| Positioning accuracy at 4 m | ±0.25 mm |
| Beam (line) width at 3 m | 0.5 mm |
| Colour / wavelength | Green, 520–532 nm |
| Emitter output power | ≤ 5 mW |
| Nominal radiated power | ≤ 1 mW |
| Focusing | Automatic / manual |
| Working scan angle | 60° |
| Maximum scan angle | ≤ 80° |
| Ingress protection | IP54 |
| Temperature monitoring | Built-in |
| Housing mass | 8 kg |
| Power consumption | < 60 W |
| Control station | up to 20 projectors |
What you get with a YUSTAS quotation
- Kit selection and price on the same business day.
- Configuration and accessories matched to your tolerance.
- The quotation covers configuration, lead time, warranty, training and commissioning.
- A demonstration of the equipment on your part or site, or at our premises.
Request a quote or a demo: send the model, configuration, quantity and required delivery date to info@ooo-justas.ru or call +7 (499) 141-82-71 (Mon–Fri, 9:00–17:00). We respond within one business day.
See also: ATLAS cutting plotters · All APEX equipment
Frequently asked questions
What area does one projector cover?
The working scan angle is 60°. From a height of 4 m this is roughly a 4.6 × 4.6 m area. Large parts use several projectors – up to 20 per control station.
Can it project onto a curved surface?
Yes. The projector builds the contour from the 3D model, so the line falls where it belongs on a curved tool.
How does the projector know where the part is?
From reference targets on the tool. The projector locates them and recalculates the contour for the actual position of the part. Registration and tooling inspection can be performed with a laser tracker.
Is the laser safe for the eyes?
Nominal radiated power is no more than 1 mW. The laser class and safety rules are given in the manual; do not look into the beam.
Does projection replace geometry inspection?
No. Projection helps position elements; the actual geometry is verified by a separate measurement method chosen for the task and tolerance.
Request a quote or a demonstration
Tell us what you need to measure, the tolerance, the size of the object and your timeline. Attach drawings if you have them. We reply within one business day.
Email info@ooo-justas.ruCall +7 (499) 141-82-71Mon–Fri, 9:00–17:00 Moscow time (UTC+3).
