YUSTAS / Laser trackers: APEX ALTAIR, API RADIAN and Leica Absolute Tracker / APEX ALTAIR 600 laser tracker (630, 660, 680)

APEX ALTAIR 600 laser tracker (630, 660, 680)

APEX ALTAIR 600 laser tracker

Tracker with BK-2 probe and 6D sensor for hidden points and orientation: 30, 60 or 80 m, ±(10 µm + 5 µm/m), Russian State Register of Measuring Instruments (Rosstandart), entry 98811-26.

Selection covers the measurement task, fixtures, software and a check of operating conditions.

How a laser tracker works

The tracker points its laser beam at a spherically mounted retroreflector (SMR) and follows it even while the reflector is moving. Up to 1,000 times per second it measures three quantities – distance D, horizontal angle Hz and vertical angle V – and computes X, Y, Z coordinates from them in real time.

The software compares the measured points with the drawing or CAD model and reports deviations. This is how the geometry of large parts is inspected, equipment is aligned to its design position, machine tools and robots are calibrated, and assemblies are built "virtually" on the shop floor.

ALTAIR 600 series: probe and 6DoF

The APEX (АПЕКС) ALTAIR 600 series does everything the 300 series does and adds measurement without direct line of sight. The wireless BK-2 contact probe touches a point inside a hole or around a corner; the 6D sensor reports not only position but also the orientation of a part or a robot tool. With an SMR the accuracy is ±(10 µm + 5 µm/m); with the probe or 6D sensor it is ±(30 µm + 5 µm/m).

Versions

The number in the model name is the range with an SMR: 630 – up to 30 m, 660 – up to 60 m, 680 – up to 80 m. All versions include the built-in interferometer (±0.5 µm/m), a ±10 µm distance meter, a weather station and a measurement rate of up to 1,000 points per second.

Applications

  • Assembly and alignment of jigs and fixtures where some points are hidden.
  • Inspection of parts with holes, slots and rear surfaces.
  • Calibration of machine tools and industrial robots: the 6D sensor provides three coordinates and three angles.
  • Monitoring the motion of an assembly and tool position.

ALTAIR 600 vs. ALTAIR 300

ALTAIR 300ALTAIR 600
SMR±(10 µm + 5 µm/m)±(10 µm + 5 µm/m)
BK-2 probeNoYes
6D sensorNoYes, ±(30 µm + 5 µm/m)
Range30, 60, 80 m30, 60, 80 m

If all points are accessible to an SMR, the ALTAIR 300 will do the job. A 300 series instrument cannot be upgraded to the 600 series later, so choose with your future tasks in mind.

Verification

ALTAIR systems are listed in the Russian State Register of Measuring Instruments under entry 98811-26; manufacturer APEX LLC, Moscow. Verification interval: one year.

Versions and specifications

ALTAIR 630 / 660 / 680 · part number on request

ParameterValue
Versions and range630 – 30 m, 660 – 60 m, 680 – 80 m
Interferometer (IFM)Yes, ±0.5 µm/m
Distance meter±10 µm
Volumetric (spatial) accuracy, SMR±(10 µm + 5 µm/m)
Horizontal angle±360°
Vertical angle−145° … +145°
Minimum distance0.1 m
Measurement rate1,000 points/s
Tracking speed3 m/s
Built-in level±1″, range ±616″
Operating temperature−10 … +45 °C
Humidity0–95 %, non-condensing
Weather stationtemperature ±0.1 °C, humidity ±6 %, pressure ±0.1 kPa (±0.75 mmHg)
Sensor head dimensions220 × 256 × 480 mm
Controller200 × 110 × 55 mm, 0.6 kg
PowerExternal battery, 6 h or more
CommunicationLAN / Wi-Fi
State Register entry98811-26
BK-2 probeYes
6D sensorYes
Accuracy with probe or 6D sensor±(30 µm + 5 µm/m)

What you get with a YUSTAS quotation

  • Kit selection and price on the same business day.
  • Version and accessories matched to your tolerance.
  • The quotation covers configuration, lead time, warranty, training and commissioning.
  • A demonstration of the instrument on your part or site, or at our premises.

Request a quote or a demo: send the model, configuration, quantity and required delivery date to info@ooo-justas.ru or call +7 (499) 141-82-71 (Mon–Fri, 9:00–17:00). We respond within one business day.

See also: APEX ALTAIR overview · ALTAIR 300 series · laser tracker measurements as a service · all laser trackers.

Frequently asked questions

What does the 600 series add compared with the 300 series?

Support for the BK-2 contact probe and the 6D sensor, which allow measurement of hidden points and determination of orientation (three coordinates and three angles). SMR accuracy and range are the same.

What accuracy does the probe or 6D sensor give?

±(30 µm + 5 µm/m), compared with ±(10 µm + 5 µm/m) when measuring with an SMR.

Can an ALTAIR 300 be upgraded to a 600 later?

No. Expanding a 300 series instrument to the 600 series is not possible, so the series should be chosen with future tasks in mind.

Can the ALTAIR 600 calibrate industrial robots?

The 600 series is used for calibration of machine tools and industrial robots: the 6D sensor provides three coordinates and three angles of the tool.

How do I find out the price and lead time?

Send the model, quantity, required configuration and date. The quotation states price, scope, payment and delivery terms. Stock and lead time should not be judged from the catalogue card alone.

Request a quote or a demonstration

Tell us what you need to measure, the tolerance, the size of the object and your timeline. Attach drawings if you have them. We reply within one business day.

Email info@ooo-justas.ruCall +7 (499) 141-82-71

Mon–Fri, 9:00–17:00 Moscow time (UTC+3).