MAYAK for marking and assembly: CAD data, registration, working area and verification of projection. *Prepared by YUSTAS engineers. Updated 12 September 2026.*
A laser projector is chosen for a production operation: showing the position of an element, a layup contour or a marking sequence. For the APEX (АПЕКС) MAYAK, start by describing the workstation and the result the operator must get.
Operations MAYAK is considered for
The supplier's description lists composite layup, positioning before welding, cable routing and contour marking. These are starting scenarios. Suitability for your product is checked taking into account its geometry, equipment placement and element positioning requirements.
What to prepare from CAD
Find out which source files exist, who prepares the contours and how the sequence will be defined. Agree units, coordinate system and how data will be updated when the product changes. Projection data preparation is part of the process and needs a responsible person.
Working area and registration
Describe the surface and its dimensions, the intended mounting position, distances, lighting and access to reference points. Check line visibility, mounting stability and the registration method. An accuracy figure stated for one datasheet distance cannot be applied to the whole range without confirmation.
How to evaluate a demonstration
If a test is available, agree a sample operation: data preparation, registration, projection and operator actions. Record the positioning criteria and how they will be checked. Clarify what happens after the tool is moved and who re-establishes registration.
What to ask about the configuration
Projector version, mounts, software, formats, data preparation, training and support. Demonstration, commissioning and service terms are agreed for the specific quotation. For a first enquiry a task description is enough; sending CAD data straight away is not required.
Next step
Describe the operation, dimensions and requirements, then see MAYAK in the catalogue. For blank preparation, consider ATLAS after a material check.
Discuss your task: info@ooo-justas.ru, +7 (499) 141-82-71 (Mon–Fri, 9:00–17:00). We respond within one business day.
Frequently asked questions
Does projection replace geometry inspection?
Projection helps position elements. Actual geometry is verified by a separate method chosen for the task and tolerance.
Can cutting and layup be combined?
It is a possible production scenario. Material, formats and the sequence of operations are checked first; ready-made compatibility between different systems should not be assumed.
Do I need to send CAD files with my first enquiry?
No. A description of the task is enough for a first enquiry; CAD data can follow later.
Does the ±0.25 mm accuracy apply over the whole range?
No. ±0.25 mm is specified at 4 m; an accuracy figure for one distance cannot be applied to the whole 1.5–12 m range without confirmation.
Request a quote or a demonstration
Tell us what you need to measure, the tolerance, the size of the object and your timeline. Attach drawings if you have them. We reply within one business day.
Email info@ooo-justas.ruCall +7 (499) 141-82-71Mon–Fri, 9:00–17:00 Moscow time (UTC+3).