YUSTAS / How to choose an ATLAS flatbed cutting plotter

How to choose an ATLAS flatbed cutting plotter

Choosing an ATLAS plotter by material, tooling and cut quality – with a trial cutting programme. *Prepared by YUSTAS engineers. Updated 12 September 2026.*

Choosing a flatbed cutting plotter starts with the material and the requirements for the blank. Table size and maximum speed do not tell you what edge quality you will get or how many good parts the cell will produce per shift.

The material defines the test

Record the material type, thickness, format and feeding method. State acceptable edge defects and whether backing, marking or other operations must be preserved. If the range is large, pick several representative samples, including the most difficult one.

Working area and tooling

The supplier describes the APEX (АПЕКС) ATLAS as a modular plotter for single-ply materials. Selection covers the working area and the required tools. Having a cutting or milling module does not prove suitability for every material: the combination of material, tool and parameters is checked separately.

Trial cutting programme

If a test is available, provide an agreed sample and a digital contour. Record the tool, material hold-down and processing conditions. Evaluate dimensions, edge quality, blank shift, preparation and processing time. Repeat a representative operation at an agreed volume so the result is not limited to a single demo part.

Real throughput

Break the cycle down into file preparation, nesting, loading, cutting, unloading and tool changes. Use the full cycle to calculate utilisation. Rapid traverse speed is not throughput, and someone else's material savings are not a forecast for your nesting.

What the quotation should include

Compare table, tools, modules, software, consumables, installation requirements, delivery and commissioning. Clarify training and support separately. Consumable lead times matter for planning the cell and should be confirmed by the supplier.

Next step

Describe the material, format and volume, then see ATLAS in the catalogue. If cut blanks must be positioned during assembly, discuss MAYAK projection.

Discuss your task: info@ooo-justas.ru, +7 (499) 141-82-71 (Mon–Fri, 9:00–17:00). We respond within one business day.

Frequently asked questions

Can a plotter be chosen by material thickness alone?

No. Material properties, contour, edge quality and tooling are needed. The same thickness in different materials does not mean the same processing parameters.

How do I estimate payback?

Collect current costs, utilisation, waste and the full cycle, then compare them with the results of an agreed test and the equipment costs. Without this data, any payback period is a guess.

What should I send with a first enquiry?

A description of the material, format and volume is enough. Samples and files are agreed as the next step.

Does a milling module mean the plotter will handle any material?

No. The combination of material, tool and parameters is checked separately, ideally in a trial cut.

Request a quote or a demonstration

Tell us what you need to measure, the tolerance, the size of the object and your timeline. Attach drawings if you have them. We reply within one business day.

Email info@ooo-justas.ruCall +7 (499) 141-82-71

Mon–Fri, 9:00–17:00 Moscow time (UTC+3).